62
802.11x
Select SSID: Select a SSID for configuring the security settings.
Network Authentication: Select the 802.1X in the drop-down list.
RADIUS Server IP Address: Enter the IP address of the RADIUS server. RADIUS server is used to authenticate the
hosts on the wireless network.
RADIUS Port: The port number that the RADIUS server uses. The default port number is 1812. You may change it
according to the server setting.
RADIUS Key: Set the RADIUS key for accessing the RADIUS server.
WEP Encryption: You can only select Enabled.
Encryption Strength: You can set 64-bit or 128-bit key.
Current Network Key: The current key that you use.
Network Key1/2/3/4: Set the network key. If it is 128-bit key, you need to enter 13 ASCII characters or 26
hexadecimal digits. For the 64-bit key, you need to enter 5 ASCII characters or 10 hexadecimal digits.
To Next Page
Loading...
