Page 12/55 68_Afficheur_Multidisplay_um_UK_11
2.5.1 Display Settings
The Display Settings menu gives access to:
• The Display Mode
• The Daylight Mode settings
• The Night Mode settings
• The Stand-by timing
2.5.2 Backlighting
The backlighting can toggle automatically between Night and Day settings, driven by
a light sensor, or can be manually set. Backlight settings can be adjusted as required
for each Multigraphic independently.
Backlight setup process:
• Select «Display setting » and press .
• Highlight « Display mode » and press .
• Choose « Auto » or « day » or « Night » and press .
Auto: Backlighting toggles automatically between Night and Day settings, driven by a
light sensor. The Backlight intensity and the Skin are those set for each Mode.
Day: Backlighting is on with the light intensity and the Skin set for Day Mode.
Night: Backlighting is on with the light intensity and the Skin set for Night Mode.
There are 20 levels of Backlighting.
Whatever page is currently displayed press and hold « OK » for 3 seconds
to access directly to the backlight levels settings.
2.5.3 Setting Night and Day modes
Setting procedures are identical for Day mode and Night mode.
Backlight intensity setting: 1 to 20
• Go to «Display setting» and press .
• Choose « Day adjustment » or « Night adjustment » and press
.
To Next Page
Loading...