Page 44/55 68_Afficheur_Multidisplay_um_UK_11
Alarm setup procedure for the pilot:
On the pilot page:
• Press
, a window will open.
• Select « Pilot alarms » and press .
• Select « Wind/head ON/OFF » and press .
• With your keypad it is possible to modify Wind/head settings but also the battery
level.
2.11.8 Pilot page on remote display
The Pilot page can be temporarily displayed on a remote display, according to the
Pilot actions generated on the bus (Gyropilot, Gyrographic, Multigraphic and Pilot
Pad). With this option enabled, the Pilot page will display during 5 seconds as soon
as an action is made on the “Auto”, “± 10°”, “± 1°” or “tack” on a remote control or a
Gyropilot control display.
To Next Page
Loading...
