Page 17/55 68_Afficheur_Multidisplay_um_UK_11
2.5.10.4 Orientation
It is possible to change the layout of your Multidisplay. To do so, go in >>
parameters >> maintenance >> orientation: select « landscape » or « Portrait »
and save with
.
2.5.10.5 Keypad Beep
The keypad beep is a sound emitted by the Multidisplay when a command is
sent by the Pad display or Pad pilot. It is possible to activate or inhibit this sound in
>> parameters >> maintenance >> Keypad Beep.
2.5.10.6 Firmware
This page displays the Multidisplay software version and date of issue.
Display the firmware:
• In parameters >> maintenance >> Software: press to see the Firmware
and bootloader version.
• Press to quit.
2.5.10.7 Memory
This menu allows the user to reset the Multidisplay to factory settings.
Reset the Multigraphic :
• Select « Memory » and access to the options by pressing .
• Select « Yes » to erase the memory by pressing
2.5.10.8 Simulator
There is a simulator available in the Multidisplay. Once activated, it sends random
data to the Topline bus.
Simulator menu:
Select « Simulator » and choose « on » or « off », save your choice with
.
By default, the Multidisplay is in landscape with the logo nke on the right. In
portrait, the logo is at the bottom of the screen.
Some parameters are not available in Portrait such as the type of page.
WARNINGS:
To Next Page
Loading...
