Page 18/55 68_Afficheur_Multidisplay_um_UK_11
2.5.10.9 Autotest
Autotest is useful to check the Multidisplay. This procedure verifies the following
functions step by step:
• keys
• colour display
• light sensor (vlight), internal temperature sensor, power supply.
• backlighting
• memory
• Topline bus
• NMEA input and output (connect the yellow and red wires together for that
operation).
• Data logged in cookies
Proceed to each step by confirming with
.
• Select « Autotest » and choose the option with .
Follow the instructions and press to go to the next page.
If your display is in portrait orientation, the autotest process is not available.
To Next Page
Loading...
