NLB 1012D - Page 120

Revision 6
13. Use your fingers to insert each bushing and packing set piece (Figure 8-13) and use
Special Tool PD-33A or PD-34B Packing Drift to seat each piece into its final position
(Figure 8-14).
Figure 8-13. Inserting each piece.
Figure 8-14. Seating each piece.
Caution:
Offset the splits in the packing during installation. If the splits are lined up
packing failure
will result.
© Copyright October, 2001 NLB Corporation 8-14