Why does my NMC Label Maker show 'Printer Time Out'?
The 'Printer Time Out' error message on your NMC Label Maker indicates a potential issue with the USB or power connection. Please inspect all cable connections and ensure that the power is correctly connected to the printer and turned on.
What to do if my NMC UDO LP400 Label Maker prints horizontal or vertical streaks?
If your NMC Label Maker is producing labels with horizontal or vertical streaks, thoroughly clean the print head and platen roller using the provided cleaning pen. If the problem persists, advance the vinyl or ribbon 1 to 2 inches and attempt to reprint the label.
How to fix NMC Label Maker when POWER and READY Lights blink at the same time?
If the POWER and READY lights on your NMC Label Maker are blinking simultaneously, try the following: replace the vinyl roll, re-install the label roll correctly, and remove any jams.
What to do if data sent to NMC Label Maker, but nothing prints?
If you've sent data to your NMC Label Maker but nothing is printing, first ensure that the printer is turned on. Also, check ‘Printers and Faxes’ in the Control Panel.
Why does my NMC UDO LP400 print only half of the label?
If your NMC Label Maker is printing labels where half is faded or only half prints, the print head may not be firmly clicked in on both sides. Open and close the print head, ensuring that both sides click securely into place.
General| Brand | NMC |
|---|---|
| Model | UDO LP400 Series |
| Category | Label Maker |
| Language | English |
Steps for connecting the power adapter and USB cable to the printer.
Procedure for loading vinyl rolls into the UDO LP400 printer.
Instructions for installing printer ribbons correctly.
Configuring default settings and adjustments for continuous vinyl printing.
Overview of tools for designing and printing labels.
Tools for quickly formatting text objects on the label.
To Next Page