RH-75 Company Confidential
Service Software Instructions Nokia Customer Care
Page 36 2005 Nokia Corporation. Issue 2 06/2005
Installing SW needed for the JBV-1 SW update
Note: DO NOT CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER YET!
Run
Jbv1_update.zip
file and start SW Installation by double clicking
Setup.exe
.
Files needed for JBV-1 package setup program will be extracted.
Installation begins, please read the information shown and choose “Next” to continue.
Use suggested destination folder where JBV-1 SW Package will be installed and choose
“Next” to continue.
To Next Page
Loading...
