RH-53/54
Nokia Customer Care
48 COMPANY CONFIDENTIAL Issue 2 06/2005
Copyright © 2005 Nokia. All Rights Reserved.
Set Loss
This is the component for saving RF-losses (of cables and jigs) to file. These loss values are
needed when you tune the phone with Phoenix (using Auto-Tune component). When you
measure the losses you have to be very careful, because these values affect directly how well
the phone is tuned.
NOTE! This component is only for Auto-Tune uses. Components are protected by PKD-1CS,
PKD-1NS, PKD-1 and PKD-1P dongles using standard TSS protection procedure. Autotuning
itself is possible with all these dongles but with PKD-1P and PKD-1 dongles user is not able to
set the loss.
To Next Page
Loading...
