Issue 2 06/2005 COMPANY CONFIDENTIAL 45
Copyright © 2005 Nokia. All Rights Reserved.
RH-53/54
Nokia Customer Care
Receiver Tuning: Quick Guide for Tuning With Phoenix
■ General remarks
RF tunings must be performed in the same order as shown in this document. The order of the
corresponding menu items in the Service SW may be different.
If baseband tunings are needed, they should be completed before the RF tunings.
Avoid unnecessary tuning – factory-tuning values are always the most accurate ones.
NOTE! RF tunings need to be done ONLY if any RF block component is replaced.
Screen shots described in this document may change as the service software is developed.
Kindly refer to the Phoenix help files, the phone model specific service manual and bulletins for
help.
To Next Page
Loading...
