RH-53/54
Nokia Customer Care
62 COMPANY CONFIDENTIAL Issue 2 06/2005
Copyright © 2005 Nokia. All Rights Reserved.
■ Module Jig flash concept
Figure 18:Module jig concept
Flashing with MJ-36 is recommended in local mode. The following equipment is needed for RH
-53/54 Care (AMS) SW ypdate when the system is placed in the module jig MJ-36 and con-
nected through an FPS-8 set-up.
Item Type Description
1 MJ-36 Module jig
2 PCS-1 Power cable
3 XCS-1 Modular cable
4 FPS-8 Flash prommer box sales pack
5 AXP-8,
included in
FPS-8 sales
pack
Printer cable
6 AXS-4 D9-D9 cable
7 PKD-1 Software protection key
8 ACF-8,
included in
FPS-8 sales
pack
AC charger
9 SF-12 SRAM module (3pcs needed inside
FPS-8)
To Next Page
Loading...
