Issue 2 06/2005 COMPANY CONFIDENTIAL 13
Copyright © 2005 Nokia. All Rights Reserved.
RH-53/54
6-Disassembly and Assembly Instructions Nokia Customer Care
7.) Make sure that the edges and the screw holes of
Domesheet and the Key Dome Shield are congruent to
each other.
8.) Place the Key Dome Shield with the Domesheet on
the Engine Module exactly and press-on the Domesheet
carefully. Check if the Domesheet is correctly stuck to
the Engine Module.
7.) Remove the Key Dome Shield again. 8.) Press on the Domesheet carefully. Ensure also, that
there are no open edges or air gap.
To Next Page
Loading...
