NORDAC LINK (SK 155E-FDS / SK 175E-FDS) – Users Manual for Motor Starters as Field Distributors
108 BU 0155 en-3520
8.5 Connection accessories
The material for establishing the electrical connection is not included in the scope of delivery of the
frequency inverter. However, it can be obtained from NORD or from other commercial sources.
8.5.1 Power connections - mating connectors
Parts lists for some of the mating connectors of the installed plug connectors (power connections,
( Section 2.2.1.1 "Connection level")) are listed below.
Installed plug connector type: HARTING Q4/2+ (socket)
Recommended products for mating connectors to the installed plug connector system
Hybrid plug connector HAN Q4/2 (pin)
Number Designation Manufacturer Information
Sleeve housing, HAN-Compact
Straight cable outlet, M25
(19 12 008 0429 )
Contact insert HAN Q4/2 (pin)
2 x Crimp contact Pin 0.75mm² Harting (09 15 000 6105)
HAN-Compact Half cable gland
(19 12 000 5158)
Installed plug connector type: HARTING Q4/2+ (plug connector)
Recommended products for mating connectors to the installed plug connector system
Hybrid plug connector HAN Q4/2 (socket)
Number Designation Manufacturer Information
Sleeve housing, HAN-Compact
Straight cable outlet, M25
(19 12 008 0429)
Contact insert HAN Q4/2 (socket)
Crimp contact socket 4mm²
Crimp contact socket 0.75mm²
HAN-Compact Half cable gland
(19 12 000 5158)
Installed plug connector type: HARTING Q8/0+ (socket)
Recommended products for mating connectors to the installed plug connector system
Hybrid plug connector HAN Q8/0 (pin)
Number Designation Manufacturer Information
Sleeve housing, HAN-Compact
Straight cable outlet, M25
(19 12 008 0429 )
Contact insert HAN Q8/0 (pin insert)
Crimp contact socket 1.5 mm²
HAN-Compact Half cable gland
(19 12 000 5158)
To Next Page
Loading...