NORDAC LINK (SK 155E-FDS / SK 175E-FDS) – Users Manual for Motor Starters as Field Distributors
20 BU 0155 en-3520
1.6 Standards and approvals
All devices of the entire SK 200E series comply with the standards and directives listed below.
Approval Directive
Applied
standards
Certificates Code
CE
(European
Union)
Directive
2014/35/EU
EN 60947-1
EN 60529
EN 60947-4-2
EN 50581
C310801
EMC 2014/30/EU
RoHS 2011/65/EU
UL
(USA)
UL 60947-4-2
E365221
CSA
(Canada)
No.UL 60947-1-13
C22.2
No.UL 60947-4-2-
14
E365221
RCM
(Australia)
F2018L00028
EN 60947-1
EN 60947-4-2
133520966
EAC
(Eurasia)
TR CU 004/2011,
TR CU 020/2011
IEC 60947-1
IEC 60947-4-2
DE.HB27.B.02731/
20
Table 3: Standards and approvals
1.6.1 UL and CSA approval
File No. E365221
Categorisation of protective devices approved by the UL according to United States Standards for the
inverters described in this manual is listed below with essentially the original wording. The
categorisation of individually relevant fuses or circuit breakers can be found in this manual under the
heading “Electrical Data”. All devices include motor overload protection.
( section 7.2 "Electrical data ")
Group fuse protection
The devices can be protected as a group via one common fuse (see below for details). Pay attention
to compliance with the total currents and the use of correct cables and cable cross-sections. If the
device is mounted close to the motor, this also applies to the motor cables.
UL / CSA conditions according to the report
To Next Page
Loading...