Nord Drivesystems NORDAC LINK SK 155E-FDS - Option Slots and Equipment Versions; Option Slots; Connection Level

NORDAC LINK (SK 155E-FDS / SK 175E-FDS) – Users Manual for Motor Starters as Field Distributors
28 BU 0155 en-3520
2.2 Option slots and equipment versions
The device is configured according to the customer specification. No options can be retrofitted. All
options must be recorded by NORD when ordering and before the production process.
Defined positions on the device apply for the selected options and features. Dependencies between
the selected options and on relevant signalling devices (LEDs) or parameter settings are explained in
this instruction.
2.2.1 Option slots
The device is divided into 3 levels. Each of these levels is intended for the installation of certain
options or option groups.
2.2.1.1 Connection level
Position: bottom
The
configuration and assignment of the
power connections (mains and
motor
connections) depends on the customer's
specification for the product.
This also applies for the additional option
slots for the signal connections.
X1 =
…
X3 =
Z1 =
…
Z4 =
Power connection 1
…
Power connection 3
Additional signal connections