Nord Drivesystems NORDAC LINK SK 155E-FDS - Page 90

NORDAC LINK (SK 155E-FDS / SK 175E-FDS) – Users Manual for Motor Starters as Field Distributors
90 BU 0155 en-3520
P711 Digital output status RD
Display range
0000 0000 … 0111 1111
(bin)
00 … 7F
(hex)
Description
Display of switching status of the digital inputs
Display values
Value (Bit) Meaning
0
Digital output 1
Switching status of digital output 1
1 Digital output 2
Switching status of digital output 2
2 Mechanical b.
Switching status of mechanical brake output
3
Bus / AS-i Out Bit0
Switching status of Bus Out Bit 1
4
Bus / AS-i Out Bit1
Switching status of Bus Out Bit 2
5 Bus / AS-i Out Bit2
Switching status of Bus digital input 1
6 Bus / AS-i Out Bit3
Switching status of Bus digital input 2
P716 Current frequency RD
Display range
- 70 … + 70 Hz
Description
Display of current output frequency
Note
The value is calculated from the mains frequency and the selected direction of rotation
when enabling takes place.
In the switched-off condition (drive not enabled) a value of "Zero" is output.
P718 Mains frequency RD
Display range
- 70 … + 70 Hz
Description
Display of current mains frequency
P719 Current current RD
Display range
0.0 … 999.9 A
Description
Display of current output current
P720 Effective current RD
Display range
-999.9 … + 999.9 A
Description
Display of current measured effective current
Display values
Value Meaning
-999.9
… - 0.1
Generator current
0
… + 999.9
Motor current
P721 Reactive current RD
Display range
-999.9 … + 999.9 A
Description
Display of current measured reactive current
P722 Current voltage RD
Display range
0 … 500 V
Description
Display of current AC voltage present at the output terminals