Tools
Maintenance Schedule
OLED User Interface
100
Part 1128351_02
E 2020 Nordson Corporation
Resetting and Snoozing Maintenance Notifications
There are two ways to Reset or Snooze a maintenance notification. When a
maintenance notification occurs, the following pop-up message appears:
Maintenance 04/20/2020 14:40
Hose 1 is due
Icon Description To
Reset Reset the maintenance counter
if you have already performed
the required maintenance.
Snooze Keep the maintenance counter
going and to keep on reminding
you that maintenance is
required.
1. Select Maintenance Status and press >. You will see the icon next
to the component that requires maintenance. Use the Up/Down
navigation keys to highlight the component, then press
so you can
Reset or Snooze
2. When done, press < to return the Maintenance Status menu, or press
to return to the Home screen.
NOTES:
S If you perform maintenance or replace a component before receiving
a maintenance reminder, you must reset the maintenance reminder.
See Resetting or Snoozing Maintenance Notifications for more
information.
S System Maintenance must be enabled to receive maintenance
notifications, as well as to view maintenance status and history
reports. See Managing the Maintenance System for more
information.
To Next Page
Loading...
