System Settings
System I/O
Input
OLED User Interface
77
Part 1128351_02
E 2020 Nordson Corporation
The following table details the input bits and their sequence required to
remotely load a recipe.
4-bit 3-bit 2-bit 1-bit Selected Recipe
Low Low Low Low No Recipe
Low Low Low High Recipe 1
Low Low High Low Recipe 2
Low Low High High Recipe 3
Low High Low Low Recipe 4
Low High Low High Recipe 5
Low High High Low Recipe 6
Low High High High Recipe 7
High Low Low Low Recipe 8
High Low Low High Recipe 9
High Low High Low Recipe 10
High Low High High Recipe 11
High High Low Low Recipe 12
High High Low High Recipe 13
High High High Low Recipe 14
High High High High Recipe 15
Assigning Remote Recipe Inputs
NOTES:
S Previous input assignments will be lost when you assign an input to
Remote Recipe.
S Remote Recipe inputs are sequentially assigned (top-down) and are
dedicated only for Remote Recipe. For example, if you assign Remote
Recipe to Input #1, then you can select from Remote Recipe 1 through 3.
If you assign Remote Recipe to input #2, then you can only select
Remote Recipe 1 and 2. If you assign Remote Recipe to Input #3, then
you can only select Remote Recipe 1. You cannot assign a Remote
Recipe to Input #4.
1. Select Input, press >, select Legacy, then press > again to view the
input selection menu. The default for Input #1 is Disabled.
2. Use the Up key on the Navigation pad to select Assign, then press > to
view the input menu list selection. Use the Up/Down keys on the
Navigation pad to scroll through the list. Press to assign the input
selection you want. When done, press < to return to the Input/Output
menu.
Press
to return to the Home screen.
To Next Page
Loading...
