OLED User Interface
65
Part 1128351_02
E 2020 Nordson Corporation
Exporting Flow Report
You can export the flow logs to a USB for viewing on a device that can open
and display comma delimited (.CSV) files.
Three logs are generated; 24 hour, weekly and quarterly flow logs.
NOTE:
S Make sure the Adhesive Flow Monitoring option is enabled. (Home |
System Settings | Flow Settings)
1. Go to Home | System Settings | Flow Settings and select Reports.
Exporting Flow Reports
You can export the flow logs to a USB for viewing on a device that can open
and display comma delimited (.CSV) files.
NOTE:
S When transferring files between the melter and BBconn Cloud, the
USB drive must be formatted using FAT or FAT32. No other format,
such as NTFS and exFAT are supported.
To Next Page
Loading...
