OLED User Interface
29
Part 1128351_02
E 2020 Nordson Corporation
177 C
!
!
1
2
3
177 C
Tank
490 C
Manifold
Hose 1
Applicator 1
440 C
Item Component LED/ Icon Description
1
System Status LED
(fault)
The System status indicator will change to Red, indicating
a Fault condition.
System Status LED
(alert)
The System status indicator will change to Yellow,
indicating an Alert condition.
2
Heated Zone
!
Indicates a Fault condition.
3
Heated Zone
!
Indicates an Alert condition.
NOTES:
S In most cases, you have approximately 2 minutes to resolve an Alert
condition before the heated zone changes to a Fault condition. When a
Fault condition occurs, both the Master Heater and Pump controls
automatically switch OFF.
S Press on the OLED panel to clear and reset any zone Alert or
Fault conditions.
S Select Event Log to view all melter events (alerts, faults, parameter
changes, etc.) in the order they occurred, with the most recent on top.
S Refer to the Troubleshooting section for more information.
To Next Page
Loading...
