OLED User Interface
61
Part 1128351_02
E 2020 Nordson Corporation
2. Go to Home | System Settings | Flow Settings and select Trigger
Settings. Enter the following information
Setting Description Default
Trigger Polarity Sets the polarity for correct product trigger operation. Use Light On
for normally open triggers, Dark On for normally closed triggers.
Dark
On
Trigger Type Refer to the documentation that came with your trigger for this
information. This is also known as Trigger Sourcing.
PNP
Capture Mode Upon detecting the leading edge of a product, the falling edge can
be either the beginning of the next product (Start-to-Start) or the end
of the current product (Start-to-End).
Start-to-
Start
3. Refer to Using Teach Mode to complete setting up Flow Monitoring.
To Next Page
Loading...
