Nordson ValveMate 7197PCP-2K - Programming

ValveMate 7197PCP-2K Controller
20 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Programming
The ValveMate 7197PCP-2K Controller is operated via a touchscreen interface.
NOTE: Making an Ethernet connection allows you to also control the system via a web interface. Refer to “Make
the Ethernet Connection (Optional)” on page16 for details. This section applies to the ValveMate 7197PCP-2K
touchscreen interface. The 7197PCP web interface functions in the same manner except for the following: (1) The
Programs screen is eliminated and (2) the settings for both pumps are present on the Line, Volume, Weight, Teach,
and Timed screens.
Button Description Relevant Section in this Manual
Refresh (web only) Returns the web interface to the Main screen n/a
Log Opens the Log screen “Viewing the Log” on page42
Info Opens a screen that provides information about the
currently selected screen
n/a
Programs
(touchscreen
interface only)
Opens the Programs screen, where you can select
the type of program to create: Line, Volume, Weight,
Teach, or Timed
“Creating Programs” on page27
Save Opens the Save screen “Saving a Program to the Program
Library (Save Screen)” on
page34
Load Opens the Load screen “Opening a Saved Program (Load
Screen)” on page35
Purge Displays the Purge screen to allow adjustment of the
purge speed
“Adjusting the Purge Speed
Setting” on page26
Calibrate Displays the Calibrate screen “Calibration” on page40
Navigation
From the Main screen, you can access all other screens:
• On the touchscreen interface, all buttons except the program type buttons are present on the main screen. To
access the program type buttons, select Programs.
• On the web interface, all buttons are present on the Main screen.
Navigation
buttons
Main screen, touchscreen interface
Main screen, web interface
All buttons present on
the Main screen
Log and INFO
buttons