5www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
ValveMate 7197PCP-2K Controller
Introduction
This manual provides installation, setup, programming, and
service information for the ValveMate 7197PCP-2K Controller.
The ValveMate 7197PCP-2K Controller provides precise
dispensing control for Nordson EFD 797PCP-2K Series
progressive cavity pumps. Refer to the 797PCP-2K operating
manual for detailed information on the pump.
The ValveMate 7197PCP-2K Controller features an easy-to-
use touchscreen interface for quick setup and operation of
797PCP-2K pumps in a two-component (2K) application. This
allows you to accurately meter exact ratios of part A and part
B materials through Nordson EFD static mixers for better mix
quality and bond strength. It also provides highly repeatable
dispensing results at ±1% volumetric.
Dispense programs are created based on the way you want to
control material output, including the following:
• By dispense time, in milliseconds
• By material volume, in milliliters
• By material weight, in grams
The controller also includes a Teach feature, which allows you
to “teach” the controller the desired dispense time and volume
settings.
As with all EFD products, the ValveMate 7197PCP-2K
Controller has been produced to exacting specifications and
thoroughly tested prior to shipment.
To obtain maximum performance from this equipment, read
this manual carefully.
To Next Page
Loading...
