EasyManua.ls Logo

Nordson ValveMate 7197PCP-2K - Timed Programs

Nordson ValveMate 7197PCP-2K
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
ValveMate 7197PCP-2K Controller
Variable Range Description
Info n/a Select to view information about the current screen, including the range
limits for settings.
RPM 10–150 (RPM) Sets the motor speed in RPM; for guidance on setting the RPM, refer to
“Maximum Motor Speed Based on Viscosity” on page47.
Reverse % 0–200 (%)
(adjustable in increments
of 1%)
Based on the percentage of rotation, sets the suck-back to reverse the
motor at the end of a dispense cycle to prevent drooling.
Correction
Factor
0.1–2.00
(adjustable in
increments of 0.01)
Because rotors and stators may not be perfectly matched, the
Correction Factor linearly scales the output to ensure that the expected
amount is deposited every time.
Dispense
Time (ms)
0.001–600,000 (ms)
(adjustable in
increments of 0.001 ms)
Sets the amount of time (in ms) to open the pump for each dispense
cycle.
NOTE: In other words, the Dispense Time is adjustable between 1 ms
(0.001 s) and 10 minutes (600,000 ms).
Timed Programs
Use a Timed program to dispense primarily based on time. When a Timed program is run, the pump dispenses for
the specified time (in milliseconds) for each dispense cycle.
1. Navigate to the Timed program screen.
2. (Touchscreen interface only) Select the pump button to toggle between the Pump 1 and Pump 2 screens.
3. Select the ENABLE TIMED PROGRAM radio button.
NOTE: If you don’t enable the program, the system will not save any entered settings.
4. Enter the desired settings, referring to the table below for detailed information on each variable.
5. Select SUBMIT to save the settings. The variable table shows the saved settings.
6. To save the values you entered as a program in the Program Library, refer to “Saving a Program to the Program
Library (Save Screen)” on page34.
Programming (continued)
Timed program screen, touchscreen interface
Timed program screen, web interface
4
2
3
ValveMate 7197PCP-2K Touchscreen 7197PCP-2K Web
5
5
3
4

Table of Contents

Other manuals for Nordson ValveMate 7197PCP-2K

Related product manuals