39www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
ValveMate 7197PCP-2K Controller
Disabling a Pump
Follow this procedure to disable a pump, whether for service or to test the output of only one pump in a 2K system.
1. On the Main screen, select LOAD. The Load screen opens.
2. Select the pump button to toggle between the Pump 1 and Pump 2 screens.
3. Select the DISABLE PUMP radio button. The pump connected to the controller is now disabled.
To re-enable the pump, select a program to run by creating one on the Main screen or by selecting a program
from the Load screen.
Operation (continued)
Longterm Shutdown
For long periods of downtime or for storage, refer to the applicable pump manual to remove the pump stator(s).
Removing the stator prevents rotor deformation.
Load screen, touchscreen interface
Load screen, web interface
ValveMate 7197PCP-2K Touchscreen 7197PCP-2K Web
1
2
3
3
1
2
To Next Page
Loading...
