45www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
ValveMate 7197PCP-2K Controller
Technical Data (continued)
Sinking Wiring Diagram for Connecting the Cycle Initiate (Ex_Trig)
I/O Port Pin Assignments and Wiring Diagrams (continued)
Sourcing Wiring Diagram for Connecting the Cycle Initiate (Ex_Trig)
Pin 6: Ex_Trig (-)
NO (normally open)
Pin 15: 24 VDC source
Pin 5: Ex_Trig (+)
Pin 9: GND
Pin 6: Ex_Trig (-)
Pin 15: 24 VDC source
Pin 5: Ex_Trig (+)
Pin 9:
GND
External contact
(normally open)
NOTE: The breakout board shown in these diagrams is an optional component available to facilitate wiring
connections to the I/O port. A DB-15 cable is also required. Both components are available in a kit (P/N 7364775).
Pin 1:
Estop_H
Pin 2:
Estop_L
NC (normally closed)
Wiring Diagram for Connecting the Emergency Stop (ESTOP) Circuit
To Next Page
Loading...
