Nordson ValveMate 7197PCP-2K - Programming (continued); Changing Controller IP Address

37www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
ValveMate 7197PCP-2K Controller
Changing the IP Address of the Controller
A ValveMate 7197PCP-2K Controller must have a unique IP address. If a controller is connected to a network that
includes another device with the same IP address, follow this procedure to change the IP address of a ValveMate
7197PCP-2K Controller.
NOTE: Each computer in a 797PCP-2K system must also have a unique IP address. Refer to “Appendix A,
Changing the IP Address of a Computer” on page49 to change the IP address of a computer.
1. On the Main screen, select SAVE. The Save screen opens.
2. Enter the desired IP address (1–255) next to “Change IP address.”
3. Select SUBMIT.
4. Cycle the controller power to make the IP address live.
The new IP address is reflected on the Main screen as 192.168.19.xxx:8088/Iface.php, where the xxx
represents the changed digits.
Programming (continued)
Field Description
Save current program as program number: Used to save a program to the Program Library.
Change IP address: 192.168.10. Used to change the IP address of the controller. Refer to
“Changing the IP Address of the Controller” on page37.
Save screen, touchscreen interface
Save screen, web interface
ValveMate 7197PCP-2K Touchscreen 7197PCP-2K Web
1
2
3
3
1
2