Nortel M760 - Deleting a Record from the Incoming Calls Log; Deleting All Records from the Incoming Calls Log

The incoming calls log
41
Deleting a record from the incoming calls log
1 - Press the Delete interactive key.
The display prompts you to confirm that you want the record
deleted.
2 - Press the key to confirm the deletion.
The list will be updated, and the display shows the next record.
Delete
1 - Press the key.
The display shows « PROGRAMMING»
2 - Press the key
The display shows « CLEAR LOGS».
3 - Press the key.
The display shows the first selection.
4 - Press the key
The display shows «DELETE INCOMING CALLS LOG».
5 - Press the Delete interactive key.
The display will prompt you to enter your password.
6 - Enter your password.
You will hear two beeps. The display confirms that the entire
incoming calls log has been deleted.
Note: You can use the red key to abort or terminate the
procedure.
Deleting all records from the incoming calls log
Password
While consulting the log, you can delete the record displayed.
You can delete all numbers stored in the incoming calls log.
Delete