38 LCD-160 P/N 51850:A 09/26/2003
Screen Displays Operating Screens
SOFT KEYS
ACKNOWLEDGE - Press this key to acknowledge an event. The command will read
ACKNOWLEDGE FIRE ALARM if the event is a fire alarm. It will read ACKNOWLEDGE if the
event is any other type. The command will not display if there are no events to acknowledge.
MORE INFORMATION - Press this key to view additional device or event information on the
“More Information” screen.
PROGRAM - Press this key to go to the “Panel Program Menu.” This option will not be visible if
any unacknowledged fire alarms exist or if the programming switch is not enabled. See “Setting the
Programming Switch” on page 33.
SIGNAL SILENCE - Press this key to silence all FACP outputs programmed as silenceable.
SYSTEM RESET - Press this key to send a reset command to the panel and to clear the LCD-160
database of all off-normal events.
MENU - Press this key to return to the “Main Menu.” This option will not be visible if an
unacknowledged event exists.
To Next Page
Loading...
Need help?
General
