EasyManua.ls Logo

Notifier XPIQ - Page 15

Notifier XPIQ
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic Components Product Description
XPIQ PN 51013:C 7/01/03 15
XPIQ-MB Features
• Four Class B speaker circuits which are continuously supervised in On and Off state
• XPIQ-CA Class A option board for conversion of four Class B speaker circuits to four Class
A speaker circuits
• Accepts four audio riser channels from XPIQ-AIB4 option board
• Four amplifier slots
• Continuously supervised amplifiers
• All-call local page capability with optional RM-1(SA) remote microphone and XPIQ-RMI
• Two independent user configurable tone generators either for riser backup or as a main tone source
• Supports routing of all-call page from single remote microphone to other XPIQ-MBs in the
same cabinet
• Supports a variety of backup configurations
✓ 1 to 1 backup
✓ 2 to 1 backup
✓ 3 to 1 backup
✓ 2 to 2 backup
✓ 1 to 1 external backup (backup amplifier in another XPIQ)
✓ 2 to 1 external backup (backup amplifier in another XPIQ)
✓ 3 to 1 external backup (backup amplifier in another XPIQ)
✓ 4 to 1 external backup (backup amplifier in another XPIQ)
Note: Refer to "XPIQ Audio Amplifier Installation" on page 38 for rules that apply when using more
than one type of audio amplifier.
• Supports backup amplifier sharing between two or more XPIQs within the same cabinet
• Four Class B or two Class A firefighter telephone zones capable of distinguishing open, short
and off-hook states
• Busy tone on firefighter telephone circuits
• Supervised firefighter telephone riser input with in and out terminals
• Alternate use of firefighter telephone circuits as four Class B or two Class A NACs, each
rated at 2A, 24 VDC
• XPIQ-PS(E) power supply control/supervision that includes AC, battery and charger
monitoring
• AC trouble delay option (none, 8 or 16 hour delay)
• Ground fault detection
• Serial port for configuration download from PC
• Easy software upgrading accomplished by downloading from PC via serial port
• Nonvolatile memory for storing configuration data
• Pluggable terminal blocks for field wiring
• Background music input terminal block
• Ten position background music volume control switch
• Accessory trouble input

Table of Contents