Need help?Do you have a question about the Notifier XPIQ and is the answer not in the manual?
General| Brand | Notifier |
|---|---|
| Model | XPIQ |
| Category | Marine Radio |
| Language | English |
Discusses the general caveats regarding fire alarm system effectiveness and insurance.
Highlights the importance of detector location for proper fire detection function.
Discusses limitations of warning devices and potential user response issues.
Addresses power dependency, equipment compatibility, and essential maintenance.
Covers safe handling of power, boards, and static-sensitive components.
Details operating environment requirements and wiring specifications.
Includes FCC and Canadian regulatory statements for the equipment.
Provides a general overview of the XPIQ system and its modular design.
Lists all necessary components for a functional XPIQ system configuration.
Details the technical specifications of various XPIQ components and modules.
Explains the function of LEDs on different XPIQ modules.
Describes the physical controls and switches on the XPIQ modules.
Details the primary hardware components of the XPIQ system.
Lists optional add-on boards and their functions for system expansion.
Lists other manuals relevant to the XPIQ system for further information.
Covers cabinet options and backbox mounting procedures.
Illustrates various XPIQ installation scenarios in cabinets.
Covers connecting primary power, battery charger, and secondary power.
Explains motherboard wiring and speaker circuit connections.
Describes installing audio amplifiers and configuring backups.
Details the SLI board and its SLC interface.
Covers Style 4 wiring and degraded mode operation for the SLI board.
Describes Style 6 and 7 wiring configurations for the SLI board.
Explains the correct methods for terminating SLC shield wires.
Details the installation of Audio Input Boards (AIB).
Explains using AIB boards in conjunction with the ACT-2 transformer.
Describes installing the RMI board and connecting remote microphones.
Explains how to set the SLC base address using rotary switches.
Details the function of JP1 and JP2 jumpers for SLI software upgrades.
Describes the SW1 switch for enabling earth fault detection.
Covers SW2 and SW3 for configuring phone circuit wiring styles.
Details JP1 and JP2 jumpers for MB software upgrades.
Covers general programming concepts and necessary kit contents.
Details the steps for installing the PK-XPIQ programming software.
Explains the methods for connecting the XPIQ to a PC.
Describes how to launch and navigate the PK-XPIQ software.
Guides on setting up the PC's serial communication ports.
Outlines the various modes available in the programming screen.
Details creating or modifying program files without a live connection.
Sets up audio inputs and tone generation for the XPIQ.
Configures speaker zones and the type of wiring used.
Sets up amplifier assignments and backup amplifier configurations.
Configures telephone/NAC circuits and microphone usage parameters.
Covers earth fault and AC failure reporting.
Describes how to generate reports of XPIQ address assignments.
Explains how to retrieve system status and configuration parameters.
Details the process of downloading configuration data to the XPIQ.
Lists software type IDs required for programming the FACP.
Details the specific AC circuit requirements for the XPIQ.
Explains how to calculate standby and alarm current draws.
Guides on determining the necessary battery size in Ampere hours.
To Next Page