NovaStar MCTRL300 - DMX512 Channel Settings

NovaPro HD User's Manual
www.novastar.tech -31-
6.8.9 DMX512 Channel Settings
Set the starting channel of DMX512. NovaPro HD currently has extracted 16 property
channels. 0~8 have been defined with properties and the rest are not defined for the
moment.
For example, if the starting channel is set as 1, the controller will take 16 channels
from the 1st channel as available channels.
Definitions of channel properties are shown in the table below:
Channel No.
Property Definition
0
Global Brightness of LED display
1
Contrast
2
Saturation