NovaPro HD User's Manual
www.novastar.tech -38-
9 Firmware Upgrade
There are two ways to upgrade the firmware of Pro HD: upgrade by U disk and LCT
client.
1) Upgrading firmware by U disk
Firmware upgrade by U disk must meet two conditions:
a) The format of the U-disk must be FAT12/16/32.
b) Software package must extract to the root directory of the U-disk.
There are two ways to upgrade firmware by U-disk: a) Plug U disk into the USB port
on the front panel. Press FRZ button and PIP button simultaneously when turning on
power and the unit will enter firmware upgrade mode. b) Plug in U disk after power
on. Choose whether to upgrade or not according to prompt.
2) Upgrading firmware by LCT client
Connect Pro HD to PC and run NovaLCT-Mars on PC. Log in advanced user and the
password is “admin”. Then click “admin” on your keyboard after logging in and
To Next Page
Loading...
