NovaPro HD User's Manual
www.novastar.tech -42-
If connecting Pro to display, please confirm whether the
display supports the output resolution of Pro.
Try to cut the power and restart the device. Then reset Pro
and do the operations again.
Check whether channel 2 has signal input and it is displayed
normally.
Check whether the parameter settings of PIP are correct.
Channel effect is
abnormal
Check whether channel is switched on.
Check whether montage is enabled and the parameter
settings are correct.
Check whether input signal is normal.
1) This product only supports rectangular screen composed
of cabinets with same size and specifications for machine
configuration. Irregular cabinets and screens need to be
configured on LCT client.
2) It is not recommended to alternately operate one LED
display via machine operation, Web operation and LCT client
operation.
Please troubleshoot the devices according to above steps. If problems cannot be
solved, please contact our local dealers or customer service department. Since there
To Next Page
Loading...
