Chapter 5 Ethernet Configuration
OEM7 Installation and Operation User Manual v1 84
5.6 NTRIP Configuration
An OEM7 receiver can be configured as either an NTRIP server or an NTRIP client. For more
information about NovAtel’s NTRIP, refer to www.novatel.com/products/firmware-option-
s/ntrip/.
Figure 35: NTRIP System
The NTRIP caster is an HTTP internet service that acts as a communication medium between
NTRIP servers and NTRIP clients. The NTRIP caster is provided by third party sources. For a full
list of NTRIP casters, refer to the following link: http://www.rtcm-ntrip.org/home.
The following procedure describes how to configure a NovAtel base and a NovAtel rover through
a third party NTRIP caster. This configuration is recommended for optimal RTK performance.
1.
Establish a connection to the receiver using either NovAtel Connect or another terminal pro-
gram such as Windows HyperTerminal. This connection is used to send the commands in this
procedure to the receiver.
For information about establishing a connection using NovAtel Connect, refer to
the Help within NovAtel Connect.
NovAtel Connect version 2.0 or greater is required for OEM7 receivers.
Download the latest NovAtel Connect PC Utilities suite of software and
documentation, including NovAtel Connect from
www.novatel.com/support/info/documents/809.
To Next Page
