To Next Page

To Previous Page

TRADEMARK

ENVIROMUX is a registered trademark of Network Technologies Inc in the U.S. and other countries.

in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise,

without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.

CHANGES

The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the

right to make changes in the product design without reservation and without notification to its users.

CE Statement

We, Network Technologies Inc, declare under our sole responsibility that the E-16D , E-5D and E-2D are in conformity with

European Standard EN55022.

Firmware Version

Current Firmware version 3.1

As of firmware version 2.35, the webserver in the E-xD supports only TLS v1.2 security encryption. Due to security

vulnerability, SSL is no longer supported.

Exception: E-mail servers requiring SSL encryption will still be supported for alert messages.

Electrical

E-16D: 100-240VAC, 50-60Hz, 1.5A@110VAC/0.75A@230VAC

E-5D: 100 to 240 VAC at 50 or 60 Hz via AC adapter; 1.7A@9VDC (9VDC 3A power supply included)

E-2D: 100 to 240 VAC at 50 or 60 Hz via AC adapter; 1.1A@9VDC (9VDC 3A power supply included)

The E-16D contains a sealed lead acid battery. Battery maintenance must be performed by an authorized trained

technician. Always follow local laws and regulations regarding the disposal of this unit.

Turn OFF power to the ENVIROMUX and discharge your body’s static electric charge by touching a grounded surface or

use a grounding wrist strap before performing any connections to the unit.

For continued protection against fire and electric shock this device should only be connected to an AC mains outlet

equipped with a proper ground terminal.

WARNING

CAUTION

NTI ENVIROMUX E-2D User Manual

Other manuals for NTI ENVIROMUX E-2D