NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
32
Power Supplies
The status of the power supply can be seen, and when a dual power supply model is present, both power supplies will be shown.
Click on the power supply to open a web page that displays the type of item sensed, the status of the power supply, and the time
and date of the most recent alert sent regarding the power supply.
Figure 31- Power Supply status- Dual Power model
If the power supply is in alert status, the user has the option to either acknowledge the alert or dismiss it. If the user
acknowledges the alert, no additional alert messages will be sent during that alert status cycle. If the user dismisses the alert,
another alert message will be sent once the “notify again after” time designated on the configuration page (below) elapses.
The Edit option allows the user to apply a description for and configure alert parameters of the power supply.
Power Supply Alert Configuration
Figure 32- Power Supply alerts configuration-part 1
To Next Page
Loading...
Need help?
General
