NTI ENVIROMUX E-2D User Manual

NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
80
XOAUTH Settings
On the Network Configuration page is a section for XOAUTH Settings, used to enable automatic user authentication verification
when the SMTP server requires XOAUTH2 authentication (i.e. Gmail).
Note: Make sure your SMTP settings are entered correctly (username, password, “Use Authentication” is checked, etc.)
before proceeding (page 75).
1. First place a checkmark in the box under SMTP settings to enable the use of XOAUTH authentication (page 75). Click “Save”
at the bottom of the page to apply this change.
Notes: If your SMTP Server port is set to 587, make sure “Use STARTTLS” is checked (page 75).
If your SMTP Server port is set to 465, make sure “Use SSL” is checked.
Do NOT set the Server port to 25 when using XOAUTH.
2. Next click on “Generate Verification URL” under XOAUTH Settings.
Figure 89- XOAUTH- Generate Verification URL
3. A lengthy URL address will be generated. Copy and paste the entire URL into your browser.
Figure 90- XOAUTH- Copy Verification URL

NTI ENVIROMUX E-2D Specifications

General

Brand	NTI
Model	ENVIROMUX E-2D
Category	Measuring Instruments
Language	English