NTI ENTERPRISE ENVIRONMENT MONITORING SYSTEM
63
Once the Sensor is setup to be polled, alerts can be configured using the Smart Alert- Event settings. Click on "Create New
Event".
Figure 67- Events page under Smart Alerts
In the example (right), the Event
configuration is setup to send an
alert when the threshold (free
memory) drops below 16500 bytes.
All of the usual notification methods
are available to have alerts sent to
any configured users.
Visual notification in the Web
Interface of an alert will also be
seen on the Events page and under
Events on the Alarm Information
page.
Figure 68- Event settings for SNMP Sensor being monitored
To Next Page
Loading...
Need help?
General
