en-938821/2 5 - 97
CNC Operation
5
Press the
HELP
key for help on the softkeys displayed:
KERMIT transfer commands
<TRANSF> [filename]: target filename (on diskette) to be transferred
e.g.: name10.pie
<DIR> : DIR [pathname][file]: e.g. dir \dir1 cut*.pie
displays a list of files and subdirectories in the directory
<CD..> : access the parent directory
<CD> : [CD pathname]: directory to be accessed
<CD\> : access the root directory
<ABORT> : abort the current command.
Commands Already Described
Commands CD.., CD and CD\ are described in 5.9.5.3 and command "DIR" is described in 5.9.5.4.
Unloading the Active Programme
This operation requires the presence of a formatted diskette in the drive. It is used to save the current programme in
a file on the diskette.
Select the target directory for the file to be unloaded (See 5.9.5.3).
Select active programme unload. ☞
TRANSF.
Display in the dialogue window of:
Transfer >Filename: ❚
Enter the name of the file to be unloaded (See syntax). ☞
Syntax
[filename].[ext]
[filename] target filename for the active programme
[ext] target extension for the active programme.
Display of the message:
unloading part programme:
[filename].[ext]
in progress...
When unloading is complete, the dialogue line is cleared. The programme is saved.
Incidents
There is a syntax error in the filename.
Display in the dialogue window of one of the following messages:
Incorrect file name. Press any key...
Incorrect file extension. Press any key ...
Acknowledge the message. ☞
Key
No programme is unloaded.
To Next Page
Loading...
