B - 10 en-938821/2
B.13 Cycle Programming Errors
Error No. Meaning of the error
830 Positioning not completed
831 Spindle stopped
832 End point, P and K must be programmed
833 Retraction clearance too small
834 EB value: -90 < EB < +90
835 The values of P, Q, R and K are absolute values
836 The interpolation plane must be G81 or G20
837 Bad value of F or S
862 P or R and end point to be programmed
863 End point incoherent with EA
864 Milling tool prohibited in G66
871 Finished profile limits not defined
872 No dimensions in blank definition
873 P or R not programmed
874 Blank inconsistent with finished profile
875 No intersection of EA with the profile
876 Relief angle EB incorrectly defined
880 Cycle axis unknown
881 Parameter value not compatible
882 Hole bottom dimension not programmed
883 Pitch (I J K) or clearance (P) not programmed
884 More than 9 thread starts
885 Pocket incompatible with the plane selected
886 Tool incompatible with the radius programmed
887 Cut > tool diameter
888 Dwell prohibited in this cycle
889 Syntax error
890 Tool orientation incompatible
891 Return plane = bottom of hole
892 Axial feed missing
893 Lateral feed missing
894 ER prohibited in G20
895 G21,G22 prohibited in cycle
896 Dimension incompatible with tool radius
897 Length of oblong pocket < diameter
898 Tool corrector missing
899 Spindle not assigned to this group or spindle or group incompatible
To Next Page
Loading...
