Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|42
‣
DIMM_C1
‣
DIMM_C2
‣
DIMM_D1
‣
DIMM_D2
CAUTION: The components inside the DGX Station are static-sensitive devices. Protect these
devices against electrostatic discharge (ESD) by wearing a wrist strap connected to the DGX
Station chassis ground and placing components on static-free work surfaces.
The DIMMs are located on the motherboard inside the DGX Station.
1. Turn off the DGX Station and disconnect the network and power cables.
2. Remove the side panel on the right of the DGX Station when viewed from the rear.
a). Push the button on the right side of the DGX Station back panel to release the panel.
b). Lift the panel to remove it.