Nvidia DGX Station User Manual

Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|51
Creation Time : Mon Jun 5 17:40:48 2017
Raid Level : raid0
Array Size : 374964224 (357.59 GiB 383.96 GB)
Raid Devices : 3
Total Devices : 3
Persistence : Superblock is persistent
Update Time : Mon Jun 5 17:40:48 2017
State : clean
Active Devices : 3
Working Devices : 3
Failed Devices : 0
Spare Devices : 0
Chunk Size : 512K
Name : lab-VirtualBox:0 (local to host lab-VirtualBox)
UUID : c8ba911a:8634bd99:2ebeea3d:c9a7db4c
Events : 0
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync /dev/sdc
2 8 48 2 active sync /dev/sdd
This example shows the status of a RAID array in which one SSD has failed or is missing. The
failed or missing SSD is identified by the empty RaidDevice State column.
$ sudo mdadm -D /dev/md0
...
Number Major Minor RaidDevice State
0 8 16 0 active sync /dev/sdb
1 8 32 1 active sync
2 8 48 2 active sync /dev/sdd
4.7.3. Checking the Status of the DGX Station SSDs
LEDs on the DGX Station SSDs indicate the status of the SSDs. The SSDs are mounted inside
the DGX Station and are visible only when the side panel that covers the SSDs is removed.
1. Remove the side panel on the left of the DGX Station when viewed from the rear.
a). Push the button on the left side of the DGX Station back panel to release the panel.
b). Lift the panel to remove it.
CAUTION: To prevent damage from electrostatic discharge, avoid touching any of the
components inside the DGX Station other than any components that you are replacing
or servicing.
2. Examine each SSD to determine its status from the state of the LED on the SSD.


Nvidia DGX Station Specifications

General

Brand	Nvidia
Model	DGX Station
Category	Desktop
Language	English