Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|49
c). In the System Date & Time setting screen that pops up, fill in the current date and time
and click Save.
d). Press F10 and, when prompted, select OK to save your changes and exit.
4.7. Maintaining the DGX Station
Persistent Storage
The DGX Station persistent storage consists of SSDs for data storage and the operating
system. As supplied from the factory, these SSDs are configured as described in System
Memory and Storage.
4.7.1. Changing the RAID Level of the RAID Array
As supplied from the factory, the RAID level of the DGX Station RAID array is RAID 0. RAID
0 provides the maximum storage capacity, but does not provide any redundancy. If a single
SSD in the array fails, all data stored on the array is lost. If you are willing to accept reduced
capacity in return for some level of protection against failure of a single SSD, you can change
To Next Page
Loading...
Need help?
General
