Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|48
b). Firmly push the panel back into place to re-engage the latch.
6. Reconnect the network and power cables and power on the DGX Station.
The DGX Station stops at its power-on self-test (POST) and then shuts down.
7. After the DGX Station shuts down, power it on again.
When powered on a second time, the DGX Station starts up normally.
8. If necessary, set the system date and system time to the current time and date.
a). At the first NVIDIA screen to appear while the system is rebooting, press F2 to access
the UEFI BIOS Utility - EZ Mode screen.
b). Click the date and time displayed in the top left corner of the UEFI BIOS Utility - EZ
Mode screen.