Maintaining and Servicing the NVIDIA DGX Station
DGX Station DU-08255-001 _v4.6|64
‣
If you are creating a bootable DVD-ROM, you can use any of the methods
described in Burning the ISO on to a DVD (https://help.ubuntu.com/community/
BurningIsoHowto#Burning_the_ISO_on_to_a_DVD) on the Ubuntu Community Help Wiki.
Note: The ISO file that contains software image for some DGX OS Desktop releases is
greater than the 4.7 GB capacity of a single-layer DVD-ROM. You cannot install these
releases from a bootable DVD-ROM because installation of DGX OS Desktop from a dual-
layer DVD-ROM is not supported. Check the size of the ISO file that contains the DGX OS
Desktop software image before creating a bootable DVD-ROM.
4.8.2.1. Creating a Bootable USB Flash Drive by Using
Startup Disk Creator
On an Ubuntu Desktop system, you can use Startup Disk Creator to create a bootable USB
flash drive that contains the DGX Station software image.
Ensure that the following prerequisites are met:
‣
The correct DGX Station software image is saved to your local disk. For more information,
see Obtaining the DGX Station Software ISO Image and Checksum File.
‣
The USB flash drive has a capacity of at least 8 GB.
1. Plug the USB flash drive into one of the USB ports of your Ubuntu Desktop system.
2. Search for Startup Disk Creator.
‣
Ubuntu 18.04 Desktop: Open Activities overview, and in the search box, type Startup
Disk Creator.
‣
Ubuntu 16.04 Desktop: Open the Dash, and in the search box, type Startup Disk
Creator.
3. Click the Startup Disk Creator icon.
4. In the Make Startup Disk window that opens, from the Source disc image (.iso) list, select
the DGX Station software image file.
To Next Page
Loading...
Need help?
General
