PF 33 MT - PF 46 MT
Installation and connections
EN - 12
FIG. 1
4.1 - TYPE OF USE AND CONTRAINDICATIONS
IMPORTANT
PF 33 MT - PF 46 MT hot forming machine allows
pizza dough discs with different diameter and
thickness depending on the machine models and
the adjustment, beginning from a risen dough ball,
to be obtained.
The machine should be used for this purpose only;
any other use will release the manufacturer from all
responsibilities for accidents to persons or proper-
ties and will cancel all guarantee rights.
4.1.a - REASONABLY FORESEEABLE IMPROPER
USE
Do not use the machine for:
• Pressing solid materials;
• Pressing explosive materials;
• Pressing materials containing alcoholic drinks;
The above are only some indications by way of
example.
4.2 - SAFETY PLATES (Fig. 1)
The warning plates with explanatory symbols are to
be found in all those areas that may be dangerous for
operators or engineers.
DANGER
Anyone preparing to work on the machine should
protect the warning plates with the safety instruc-
tions. The non compliance with the instructions
mentioned on the safety plates will release the
manufacturer from all responsibilities for damages
or injuries to persons or properties that may arise.
Danger: machine under voltage
• Do not work with the machine under voltage.
This symbol is located on the back of the device near
the power supply cable and on the panel that accesses
the electrical parts on the left side of the machine.
Chapter 4
To Next Page
Loading...