45
Setting your terminal
To activate relay from your fax machine:
+ Insert the document to relay (refer to paragraph Document
depositing, page 74).
+ Select 37 OK- FAX / BROADCAST.
+ Enter the remote fax number where you will relay to or choose
your dialing mode (refer to paragraph Dialing, page 76) and
press OK.
+ Enter the relay list number used by the remote fax and
press OK.
+ You may enter the time you wish to transmit the document
next to the current time and press OK.
+ If you wish to modify the document feed type, select one of the
options
FEEDER or MEMORY , then press OK.
+ If you wish, you may enter the number of pages of your
documents before transmitting.
+ Activate relay by pressing key .
The document in the feeder will be relayed either immediately or at
a later time (according to your choice) to the remote fax which will
relay the document.
Fax or PC reception (depending on model)
243 OK - SETUP / RECEPTION / PC RECEPT.
This menu, combined with a software program installed on your PC
(supplied) will enable you to select the machine you wish to receive
the documents on:
•fax.
•PC.
• PC if available, fax otherwise.
For more details, please refer to p. 121
Duplex printing (optional)
This function is only available if you have previously installed the
duplex module and the additional paper tray at the back of your
terminal.
After installing the Duplex module at the back of your multi-function
terminal, you can print faxes received in two ways:
•SINGLE SIDED
• DOUBLE SIDED
All faxes received are printed according to the mode selected from
the menu, no matter how the duplex key is set.
To Next Page
Loading...
Need help?
Printer
