79
Operation
+ You may enter the number of pages before transmission and
confirm with OK.
+ Confirm postponed transmission by pressing key .
Your document is stored and will be sent at the new time.
Remark : When sending in "Deferred Send" mode, make sure that the document in
the feeder tray or on the scanner window is located in the right direction.
Transmission with auto redial
This function allows you to monitor the dialing operation during a fax
transmission. In this case, the maximum transmission rate will be
14400 bps.
This function allows for example:
• to hear if the subscriber’s fax is engaged and if so, choose the moment
when the line is clear to start the document transmission.
• to control the communication progress in case of uncertain numbers, etc.
To take the line manually:
+ Place the document in the fax feeder.
+ Press .
+ If necessary, set the sound level with navigator or keys.
+ If not already done, enter the subscriber number (or refer to
paragraph Using the last number dialed key, page -76 to
call back the last subscriber).
As soon as you hear the remote fax tone, the line is clear and you
can start the transmission.
+ Press to start the document transmission.
If your terminal is set in order to print a transmission report (refer
to paragraph Main settings, page -38), the reduced copy of the
document first page will not be printed and it notifies you that the
communication is manual.
Rerouting
This function is used to reroute faxes received to a directory contact.
To use this function, you
have to perform two operations: set the rerouting address of the fax
and activate rerouting.
Activate rerouting
3911 OK - FAX / FAX FORWAD. / REROUTING /
ACTIVATION
+ Using the keys or within the navigator, select option >>3911
WITH
.
To Next Page
Loading...
Need help?
Printer
