Chapter 7: Accessories
7-20
Mounting hooks
Cutouts
Installing the tractor
feed
6. Once the two feet are fitted,
you need to fold them out to
allow you to install the trac-
tor feed. As a result, the
printer will tilt backwards.
Replace the platen knob.
To install the tractor feed, you
need firstly to fold out the two
support feet. Then proceed as
described below:
Caution!
The print head moves and can cause injury to the hands.
Switch the printer OFF LINE and wait until the print head stops
moving.
Caution!
The print head may be hot and can burn your hands.
Wait until the print head has cooled down.
To Next Page
Loading...
